10
INSTALLATION
Caution!
Do not drill into
buried cables or pipes.
Warning!
Isolate the electrical and water supplies before installing the shower.
Remove the three screws that
hold the cover on and remove
the cover.
Remove the service tunnel.
Using the installation template
supplied, mark the positions
of the
three
fixing holes.
Note!
Ensure that there are
sufficient lengths of supply pipe
and electrical cable to reach the
connection points.
Remove the installation template
and drill three holes to suit the
fixing screws and wall plugs.
Caution!
Do not drill into cables
or pipes in the wall.
1
3
4
2
Cover
Screws
Screw
Service
Tunnel
