background image

32

1490289-W2-A

What to do if something goes wrong

If your product is not working correctly please refer 

to this manual for fault diagnosis and to check that 

it is installed and commissioned in accordance with 

our instructions. If this does not resolve the issue, 

our Customer Services team are here to help get you 

back up and running. To help us solve your problem 

quickly, please have your product name, power rating 

(if applicable) and date of purchase to hand.

Visit www.mirashowers.co.uk 

Visit our website to register your guarantee, book a 

service visit, diagnose faults and purchase products.

Spares and Accessories 

We stock a full range of spare parts and fi ttings and are 

all available to purchase either online or over the phone. 

Our online spare parts selector tool will help you quickly 

and easily identify the spare part for your product. 

Visit www.mirashowers.co.uk/parts-accessories

Replacements and Repairs 

In the unlikely event that your product needs a repair, 

our nationwide repairs and installation team are here to 

help. You can book a convenient date and time online. 

Scan the QR code to book a service visit 

now or visit www.mirashowers.co.uk/

support/repair-services/repair-service

We also off er a comprehensive replacement service 

for when your product needs a little refresh, visit our 

website or contact our team for more information on 

our replacement services.

Help us improve 

Your experience is important to us and your review 

(whether good, bad or otherwise) will be posted on 

Trustpilot.com immediately to help other people make 

more informed decisions.
Visit uk.trustpilot.com/review/www.mirashowers.co.uk

Mira is a registered trade mark 

of Kohler Mira Limited.

The company reserves the right 

to alter product specifi cations 

without notice.

EU Importer address

K/E S.A.S.

3 rue de Brennus,

93631, La Plaine Saint-Denis,

France

Registered Offi  ce: 

Cromwell Road,

Cheltenham, 

Gloucestershire 

GL52 5EP

14648

Guarantee 

Your  product  has  the  benefi t  of  our  manufacturer’s 

guarantee which starts from the date of purchase. 

This guarantee only applies in the United Kingdom 

and Republic of Ireland.

Activating Your Guarantee

Registering your guarantee is quick and simple. To 

ensure your product is covered, please register online .

Scan the QR code to activate your 

guarantee now or call 0800 5978551 

within 30 days of purchase (UK only).

 

What is Covered:

  ●  The  guarantee  applies  solely  to  the  original 

installation under normal use. 

  ●  The  product  must  be  installed  and  maintained 

in accordance with the instructions given in this 

guide.

  ●  Servicing must only be undertaken by us or our 

appointed representative.

  ●  Repair  under  this  guarantee  does  not  extend 

the original expiry date. The guarantee on any 

replacement parts or product ends at the original 

expiry date.

  ●  For  shower  fittings  or  consumable  items  we 

reserve the right to supply replacement parts only.

The guarantee does not cover:

  ●  Call  out  charges  for  non  product  faults  (such 

as damage or performance issues arising 

from incorrect installation, improper use, 

inappropriate cleaning, lack of maintenance, 

build up of limescale, frost damage, chemical 

attack, corrosion, system debris or blocked fi lters) 

or where no fault has been found with the product.

  ●  Water  or  electrical  supply,  waste  and  isolation 

issues.

  ●  Routine  maintenance  or  replacement  parts 

to comply with the requirements of Building / 

Plumbing / Electrical Standards or Schemes.

  ●  Compensation for loss of use of the product or 

consequential or indirect loss of any kind. 

  ●  Damage  or  defects  caused  if  the  product  is 

repaired or modifi ed by persons not authorised 

by us or our appointed representative.

  ●  Accidental or wilful damage. 

  ●  Products purchased ex-showroom display.

  ●  Disinfection  or  descaling  to  reduce  bacterial 

growth or contamination.

Need to get in touch? 
UK

T: 0800 001 4040

E: [email protected]

www.mirashowers.co.uk

Eire

T: 01 531 9337

E: [email protected]

www.mirashowers.ie

1473739-W6-A

Customer Service

Customer Support

© Kohler Mira Limited, August 2021

Summary of Contents for Mira Jump 10.5 kW

































Reviews: