Kohler KDI-2504TCR, Owner'S Manual

Page: 37 / 48

6
37
B
B
C
B
C
A
G
E
G
D B
6.7
6.8 6.9
6.10
EN
INFORMATION ABOUT REPLACEMENTS
6.3 Fuel filter cartridge replacement
NOTE: The fuel filter is situated on the
crankcase of the engine or it may be
assembled on the frame of the vehicle.
1. Disconnect the cable A of the water presence sensor C.
2. Remove the water presence sensor C from its cartridge B.
3. Loosen the cartridge B using the appropriate wrench.
4. Lubricate the gasket D of the new cartridge B.
Important
• Do not fill the new cartridge
B with fuel.
5. Tighten the new empty
cartridge B (Fig. 6.9) on the
diesel fuel filter support E
using the special wrench
(tightening torque of 17
Nm).
6. Tighten the water
presence sensor C on the
new cartridge B (tightening
torque of 5 Nm).
7. Reconnect the cable A of
the water presence sensor
C.
NOTE: Bleeding.
8.
Push repeatedly the button G in order to fill the circuit.
6.4 Air filter cartridge replacement
NOTE: Refer to the technical documentation of the vehicle.