- 60 -
6
142
143
144
145
Components:
1
Fuel supply pipe from the tank
2
High-pressure pipe
3
Capillary tester
4
Valve-lowering lever with dial indicator showing piston movement
Fuel system
Rotate the crankshaft anticlockwise until diesel starts to flow out from
the capillary when the high-pressure lever is pressed.
Change direction of rotation of the crankshaft to clockwise from the
timing belt side.
Press the high-pressure lever and rotate the crankshaft until fuel
stops flowing from the capillary.
Press the lever to bring the valve into contact with the piston crown.
By joggling back and forth clockwise and anticlockwise, find the dead
centre via the dial indicator and then reset to zero.
Rotate the crankshaft clockwise on the timing belt side and position
the relevant cylinder piston at top dead centre.
KD Workshop Manual_cod. ED0053029350_
1° ed
_ rev.
00
Summary of Contents for KD 626/3
