Kohler KD 626/3, Workshop Manual

Page: 41 / 106

- 41 -
4
84
85
86
87
E 80,870 ÷ 80,890
F 45,548 ÷ 45,578
G 55,430 ÷ 55,460
H 55,000 ÷ 55,020
E-A 0,070÷0,109 0,195
F-B 0,032÷0,078 0,150
G-C 0,060÷0,110 0,195
H-D 0,050÷0,089 0,180
I 85,785 ÷ 85,815
L 152,000 ÷ 152,020
M 60,000 ÷ 60,020
N 150,000 ÷ 150,020 *
O 148,000 ÷ 148,020 *
P 77,990 ÷ 78,010
Diameter of main bearings
Use an inside micrometer to measure the inside.
Disassembly / Reassembly
* with tightened bearing
Main bearing supports
1 Flywheei side 3 2nd central
2 1st central 4 Gear side
Clearance between main journals/crank pins and connecting
rod bearings
Main bearing and connecting rod big end bearing inside diameter
The above dimensions refer to driven in or tightened bearings.
Note: Both main bearings and connecting rod big end bearings are
available with inside diameter size measuring 0,25 and 0,50
less than the standard version.
Ref. Dimensions (mm)
Ref. Dimensions (mm) Limit value (mm)
Ref. Dimensions (mm)
KD Workshop Manual_cod. ED0053029350_
1° ed
_ rev.
00