Kohler KD 626/3, Workshop Manual

Page: 53 / 106

- 53 -
6
126
127
128
Fuel system
Injection pump only for standard and 97/68 Ce engines
1 Delivery union
2
Rubber ring
3 Delivery valve
4 Pump housing
5 Piston
6
Plunger
7 Rack rod
8 Spring
9 Tappet body
10 Roller
11 Journal
12 Pin
13 Spring retainer
14 Eccentric
15 Copper gasket
16 Spring
17 Filler
1 Delivery union
2 PRV valve
3
O-Ring
4 Pump housing
5 Pumping piston
6 Pumpung plunger
7 Elastic pin
8 Rack rod
9 Superior retainer
10 Spring tappet
11 Tappet body
12 Inferior retainer
13 Roller
14 Journal guide tappet
15 Elastic pin
16
Adjustment hose
17 Plunger stop pin
18 Cap
Injection pump only for EPA engines
19
Threaded plug
20 Adjustment rod locking device
21 Area in which the pump delivery class is stamped
In this engine the injection pumps are preset by the manufacturer who
supplies them stamped with alphabetical classes (A, Ax, B, Bx, C, Cx
or D) for standard and 97/68 EC engines, while for EPA2 engines the
classes are numerical (5, 6, 7, 8, 9, 10, 11, 12, 13 and 14).
The adjustment rod is locked via the bayonet device.
KD Workshop Manual_cod. ED0053029350_
1° ed
_ rev.
00