Kohler KD 626/3, Workshop Manual

Page: 2 / 106

- 2 -
CUSE/ATLO
REGISTRATION OF MODIFICATIONS TO THE DOCUMENT
Any modifications to this document must be registered by the drafting body, by completing the following table.
Drafting
body
Document
code
Edition Issue date
Review
date
Model
N°
Revision Endorsed
PREFACE
- Every attempt has been made to present within this service manual, accurate and up to date technical informa-
tion.
However, development on the KOHLER series is continuous.
Therefore, the information within this manual is subject to change without notice and without obligation.
- The information contained within this service manual is the sole property of KOHLER .
As such, no reproduction or replication in whole or part is allowed without the express written permission of
KOHLER .
Information presented within this manual assumes the following:
1 - The person or people performing service work on KOHLER series engines is properly trained and equipped to
safely and professionally perform the subject operation;
2 - The person or people performing service work on KOHLER series engines possesses adequate hand and
KOHLER special tools to safely and professionally perform the subject service operation;
3 - The person or people performing service work on KOHLER series engines has read the pertinent information
regarding the subject service operations and fully understands the operation at hand.
- This manual was written by the manufacturer to provide technical and operating information to authorised KOHLER
after-sales service centres to carry out assembly, disassembly, overhauling, replacement and tuning operations.
- As well as employing good operating techniques and observing the right timing for operations, operators must
read the information very carefully and comply with it scrupulously.
-
Time spent reading this information will help to prevent health and safety risks and financial damage.
Written information is accompanied by illustrations in order to facilitate your understanding of every step of the
operating phases .
02/07/2012 1° 0 ED0053029350 51261 02/07/2012
KD Workshop Manual_cod. ED0053029350_
1° ed
_ rev.
00