Kohler 1190330-NA, Installation And User Manual

Page: 11 / 24

11 1095640-W2-B
Solid Wall or Stud Partition
Outlet Pipe BIR
Outlet Pipe BIV Outlet Pipe BIV
Cold Inlet Hot Inlet
Thermostatic
Mixer
Alternative Pipe
Layouts
1. Determine the route for the hot and
cold supply pipework and for the outlet
pipework. When connecting to BIV
shower fittings it is recommended that
the outlet be positioned above and to
one side of the mixer. This is to prevent
the flexible hose from obstructing the
shower controls.
2. Remove the shroud screw (retain for
later use) and remove the mixer from
the building-in shroud.
3.
Determine the position of the mixer
and draw around the building-in
shroud.
4. Mark the routes for the hot and cold
supply pipework:
Hot - Left
Cold - Right
5. Mark the route for the outlet pipework.
Note! (if applicable) The outlet elbow
should be sited above the mixer and
on the right or left, as site dictates.
Building-in
Shroud
Shroud Screw
INSTALLATION PROCEDURE