12
1095640-W2-B
Finished Wall
Surface
Finished Wall
Thickness
Depth X
(90 - 105mm)
Rear Mounting
6.
Cut away the plasterboard and/or brick
work to the required depth.
Important!
This depth ‘X’ will depend
on the finished wall thickness e.g. tiles
or facia board.
For stud partitions depth ‘X’ refers to
the distance from the rear mounting
e.g. timber noggin, to the front of the
wall (before tiling).
7.
Make sure that the mixer is level,
central in the hole and square to the
finished wall surface (or the control
components will not fit correctly), then
use two of the three fixing holes to
mark the positions for the fixing screws
on the wall.
8.
For solid walls drill two 6 mm holes for
the wall plugs.
Note!
For stud partition installations
alternative fixings may be required
(not supplied) to fix the mixer to the
rear face of the wall cavity or to a
timber noggin.
Summary of Contents for 1190330-NA
Page 22: ...22 1095640 W2 B NOTES...
Page 23: ...23 1095640 W2 B NOTES...
