3. Meter Post Installation
•
Remove x4 M8x15 Hexagon Bolts
(24)
and x4 ø8xø20x1.5 Arc Washers
(36)
from
the tube of Main Frame
(1)
. Remove bolts using the S6 Allen Wrench provided.
•
Connect the Sensor Wire
(26)
from the Main Frame
(1)
to the Extension Sensor
Wire
(59)
from the Handlebar Post
(3)
.
•
Put the Cable end of resistance cable of Tension Control Knob
(7)
into the cable
lock of Tension Cable
(54)
. Pull the resistance cable of Tension Control Knob
(7)
up
and force it into the slot of metal bracket of Tension Cable
(54)
. Insert the metal
fitting on the resistance cable of Tension Control Knob
(7)
into the hole at the end
of slot in the metal bracket of Tension Cable
(54)
.
•
Connect the resistance cable of Tension Control Knob
(7)
to Tension Cable
(54)
complete.
•
Insert the Handlebar Post
(3)
onto the tube of Main Frame
(1)
and secure with x4
M8x15 Hexagon Bolts
(24)
and x4 ø8xø20x1.5 Arc Washers
(36)
that were removed.
Tighten bolts using S6 Allen Wrench provided.
Tool:
Summary of Contents for Fortis EXR-500
Page 1: ...MAGNETIC FLYWHEEL UPRIGHT EXERCISE BIKE EXR 500 FSMFEXR500A ...
Page 2: ......
Page 5: ...OVERVIEW ...
Page 9: ...Tool ...
