KODI KLIP KTA-3 Series, Owner'S/Operator'S Manual

Page: 9 / 24

- 9 -
4. Grip the Tool firmly and position the Tool’s Nozzle directly over the rebar to be
connected.
•
CROSS CONNECTION: Klip Magazine must be parallel to top rebar.
See Figure
#5 Below
• vPARALLEL CONNECTION: Klip Magazine must be perpendicular to the
primary rebar and the adjoining rebar must be pushed into the other rebar slot.
See Figure #6 Below
Figure #6: Parallel Connecting Rebar
Figure #5: Cross Connecting Rebar
If nozzle is not properly aligned or there is insufficient downward
pressure on Tool, Klip can become jammed. (See Troubleshooting
p. 15)
CAUTION