KODI KLIP KTA-3 Series, Owner'S/Operator'S Manual

Page: 8 / 24

- 8 -
2. Position the Rack of Klips so that it aligns with the Tool's Klip Magazine and then
insert the Rack until it is fully seated
(only a fully seated Klip Rack will disengage
Sensor Shaft from Safety Unit) .
See Figures #2 & #3 Below
3. Adjust the directional Exhaust Deflector so that exhaust air is directed away from the
Operator. The Exhaust Deflector can be rotated in either direction to one of its eight
(8) stop positions.
See Figure #4 Below
The Klip Rack will only fit into the Tool’s Magazine one way, and
once seated will only move along the Magazine in one direction.
Pulling the Klip Rack back out of the Magazine will damage the
Tool's Stop Plates and prevent the Tool from operating properly.
CAUTION
Figure #3: Seating the Klip Rack
Figure #4: Adjusting the Exhaust Deflector
Figure #2: Loading the Klip Rack