Koden MDC-5200 SERIES, Operation Manual

Page: 69 / 182

MDC-5200/5500 Series Chapter 2 Radar Basic Operation
0093155002-00 2-37
2.20 Off Center
This function is used to get larger view in heading direction.
Two ways “OFF CENTER” can be setup.
[CURSOR]: Off-centering to CURSOR direction.
[OPPOSITE]: Off-centering to the stern direction.
1
Press MENU key to display “Menu”.
Select [DISPLAY] => [OFF CENT POINT] and press ENT key after selecting the off center point
“CURSOR” or “OPPOSITE”.
2 Off-centering is executed by select [DISPLAY] => [OFF CENTER],
and press ENT key.
Off-centering is executed by pressing OFF CENT key. (MDC-5500 series only)
Other method
Move cursor to set value of ON or OFF of [OFF CENT] at the upper left part of the display, and
press ENT key.
3
The difference of [CURSOR] and [OPPOSITE] are as follows.
CURSOR OPPOSITE