Koden MDC-5200 SERIES, Operation Manual

Page: 124 / 182

Chapter 6 Map operation MDC-5200/5500 Series
0093155002-00 6-6
1-1
1-2
1-3
1-4
1-5 1-6
1-1
1-2
1-3
1-4
1-5 1-6
Cursor
1-4
1-1 1-2
1-3
1-5
1-6 1-7
How to add
(1) CURSOR OPERATION
1
Press MENU key to display “Menu”.
Select [MAP] => [COAST LINE] => [ADD] => [CURSOR] => select [1 to 10] => [GO], and press
ENT key. Numerical number is displayed each points of coast line.
2
Move cursor on position that new data is added in just before it.
Press ACQ key. Circle mark will be displayed on the selected
3 Move cursor to the position that new data will be added, then press ENT key.
4
Press MENU key to exit ADD operation.
(2) BLOCK NUMBER OPERATION
1 Press MENU key to display “Menu”.
Select [MAP] => [COAST LINE] => [ADD] => [BLOCK NUMBER] => select [1 to 10] =>
Following input menu is displayed.
2
Select [NUMBER] => NUMBER data screen is displayed. => select [1 to 100] =>
Press ENT key. Selected number’s numerical data is shown.
3 Edit data of LAT, LON, COLOR and DIVIDE.
4
Select [SET], and press ENT key to save input data. New data is added as same as cursor
operation.
NUMBER 4
LAT 35 ˚ 15.368N
LON 139 ˚ 51.129E
COLOR
DIVIDE OFF
SET