Chapter 2 How to use the menu
MDC-2000BB Series
0093120012-01
2-5
Note on PPI/PPI Display
In the PPI/PPI display, to avoid risk, the following
functions do not work.
●
TM (True Motion)
●
Off center
●
Trailing
●
ATA (Optional)
●
W UP
The EBL, VRM and PI (parallel cursor) can be
displayed only in the main-screen.
PPI/NAV Display
The radar image is displayed in the left half of the
screen and the navigation data is displayed in
the right half of the screen.
The content of the navigation data display can be
selected.
For the NAV Display Select, refer to [NAV
Display Select] in 3.5 Preset.
Note on PPI/NAV Display
In the PPI/NAV display, to avoid risk, the
following functions do not work.
●
TM (True Motion)
●
Off Center
2.4
Setting of Signal Process
If the reflection from a target you desire to see is
unstable, the target is stabilized by rendering the
signal process.
Setup: OFF, ON (Initial value: OFF)
1
Press the [MENU] key,
2
Select [ECHO] → [PROCESS].
3
Change the setting of [PROCESS] with the
[ ] and [ ] keys.
4
Press the [MENU] to close the menu.
2.5
Setting of Pulse Width
The short pulse width is suitable for target
crowded area. (The resolution is of high priority.)
The long pulse width is suitable for searching a
small target as the gain increases. (The gain is of
high priority.)
Setup: RESO-P PRI. GAIN PRI. (Initial value:
GAIN PRI.)
1
Press the [MENU] key.
2
Select [ECHO] → [PULSE].
3
Change the setting of [PULSE] with the [ ]
and [ ] keys.
4
Press the [MENU] key to close the menu.
The setup of the pulse width is determined by the
range.
The setup of the present pulse width is displayed
at the left top side of the screen.
For pulse width adjustment, refer to [Pulse
Width] of 3.3 Setting of Adjustment Item.
2.6
Trailing
By leaving the trail of a target, the situation of the
moving target can be seen.
1
Press the [MENU] key.
2
Select [TRAILS] → [TRAIL MODE].
3
Change the setting of [TRAIL MODE] with
the [ ] and [ ] keys.
4
Select [TRAILS] → [TRAIL TIME].
5
Change the setting of [TRAIL TIME] with the
[ ] and [ ] keys.
6
Press the [MENU] to close the menu.
For the display method, the relative display (R)
and the true display (T) are provided.
When changing the range, display mode or
display select, the trail disappears.
Relative Display (R)
The relative speed of a target with respect of own
ship is displayed as a trail.
This is used to watch a target which is
approaching to own ship. The trail of fixed target
such as land, if own ship is moving, will be drawn.
In the illustration below, own ship is moving east
at a certain speed and other ship 1 is moving
east at the identical speed. And other ship 2 is
moving west at the identical speed. After a
certain period of time, the trails of three ships are
drawn.
Summary of Contents for MDC-2000BB Series
