Koden MDC-2000BB Series Operation Manual Download Page 5

Page: 5 / 112

MDC-2000BB Series

Document Revision History

0093120012-01

MDC-2000BB Series Operation Manual

Doc No. 0093120012

Document Revision History

No.

Doc. No / Rev. No.

Revised Date

(Y/M/D)

Revised Content

0093120012-00

2020/01/10

First edition

0093120012-01

2020/02/28

Declaration

Document No. Revised Version Norm

When part of the document needs to be revised, the document has advanced revision number.

The document No. is indicated at the lower right side on the cover and at the left or right side of the

footer region of each page.

No part of this publication may be reproduced, transmitted, translated in any from by any means without

the written permission of Koden Electronics Co., Ltd. The technical descriptions contained in this

publication are subject to change without notice. Koden assumes no responsibility for any errors,

incidentals or consequential damages caused by misinterpretation of the descriptions contained in this

publication.

(Note) MDS-2060BB/2010BB including Antenna Scanner unit: RB717A/718A are not
complied for CE Approval.

Summary of Contents for MDC-2000BB Series

















































































































Search results

Summary of Contents for MDC-2000BB Series

Reviews:

Brands by name

Popular brands

Koden MDC-2000BB Series, Operation Manual

Search results

Summary of Contents for MDC-2000BB Series

Reviews:

Brands by name

Popular brands