A-61544 July 2008
3-31
Testing your
configuration file
Once you have created the configuration file, added any destinations
you want, selected your preferred device settings and set up a
password, save and test the file.
1. Insert a USB flash drive into the USB port on your PC.
2. Select
File>Save.
The Save Configuration To dialog box will be
displayed.
3. Select the location(s) you want to save the configuration file to. If
necessary, use the
Browse
button to help you locate the folder.
4. Click
Save
.
5. When finished, exit the Configuration Organizer and remove your
USB flash drive from the PC.
NOTE: If using Windows 2000, be sure to use the “Eject
hardware” before removing the USB flash drive from
your PC. Failure to do so may result in your
configuration file not being saved correctly.
6. Test your USB flash drive by inserting it into the USB port on the
Scan Station. When the Scan Station recognizes a valid
configuration file, it will display new icons for each of your custom
destination settings on the Destination mode screen.
7. You can also verify that any custom device settings you selected are
in effect by selecting the Settings button on the Destination mode
screen and reviewing the device settings on the Settings mode
screen.