manualshive.com logo in svg

Kodak SCAN STATION 100, User Manual, Page: 45 / 80

Share
Download
Kodak SCAN STATION 100 User Manual Download Page 45

2-32

A-61544 July 2008 

The user interface screen will change, showing additional icons at 
the top of the Destination mode screen. These icons have a small 
human figure on them, indicating they are your personal 
destinations.

3. Load your document(s).

4. Select additional destinations or if your pre-selected destinations 

are okay, press the Go/Scan button. The Destination Review screen 
will be displayed.

For a quick review of the settings you will use to send these 
documents, select the 

Output

 button on the lower left-hand corner 

of the Destination Review screen; however, if you press any button 
on the screen or control panel (including the scroll arrows) the timer 
will stop and you will need to press the Go/Scan button again.

NOTE: If your Scan Station is configured for 

FAST Scanning

, 

scanning will start immediately and the Settings Review 
screen will not be displayed.

Summary of Contents for SCAN STATION 100

















































































Reviews:

No comments