32
A-61916 August 2019
-
Operator Log
- displays scanner events that have occurred since the
last time the scanner was powered on. Each event entry lists time of
occurrence, error code, and a description of the event. For example,
“Scanner Failed Initialization, Call Service.”
-
Multifeed Calibration
- initiates multifeed calibration (see “Perform a
Multifeed Calibration on page 65).
-
Count Only
- to count the documents in the elevator without scanning
them, select
Count Only
and follow the steps on the scanner screen.
The total number of documents will be displayed in the status area.
- Count Only Multifeed -
this option allows you to count documents
without scanning, however, when a multifeed is detected, the scanner
will stop. Clear the multifed documents and press the Pause/Resume
button to continue scanning.
- Flatbed Calibration
- flatbed image calibration is performed at the
factory. This may only be need after a flatbed firmware update (this is a
rare occurrence).
-
Touchscreen Calibration -
Touch screen calibration is used to verify
that the touch points on the touch screen are working correctly. The
touch screen is factory-calibrated; this should not be performed unless
directed to do so by Technical Support.
-
Alterations -
This option is for Service Use only. Only use this option
when directed to do so by Kodak Alaris Service personnel.
Summary of Contents for S2000f Series
Page 6: ...iv A 61916 August 2019...
Page 83: ......
