A-41069 January 1993
6-3
Code
Operator Message Displayed
Description/Action Required
E121
Check front patch reader
Patch code not recognized.
E122
Check rear patch reader
Verify that the patch document was fed into the
transport in the proper orientation.
If not, refeed the patch document.
If so, change to a non-patch mode to continue;
call service.
E123
Command data rejected - resend
Command not recognized. Enter command again.
E124
Command not allowed in this model
Command cannot be performed.
E125
Enter a valid command.
E126
Enter correct command
Press correct key(s) for mode selected.
E127
Feeder waiting for host system
System is busy. No action required.
Wait for message to clear.
E128
Feeder adjustment warning
Check and adjust feed and separator roller gap.
E130
OCR not installed
Requested action requires installation of the OCR
accessory.
E131
Device not enabled
Requested action requires installation of the Bar
Code Reader.
E132
Enable barcode first
Requested action requires that you enable the
E133
Bar Code Reader.
Enter function code F60 to enable bar code reading.
E140
Document Printer not installed
Requested action required installation of the
E141
Patch Reader not installed
module/accessory indicated.
E142
Detection System not installed
The required module/accessory is not installed.
E143
Barcode Reader not installed
E145
Endorser not installed
