Kodak IMAGELINK 900 User Manual Download Page 58

Page: 58 / 114

5-13

A-41069 January 1993

F43

Document Printer 12 On/Off

Allows you to turn the document printer 12 on or off.

FFF.003.002.001

Mode 10

Document Printer 12 ON

0=OFF

• Enter the number zero (0) to turn the document printer 12 OFF.
• Press the Enter key.

FFF.003.002.001

Mode 10

Document Printer 12 OFF

1=ON

• Enter the number one (1) to turn the document printer 12 ON.
• Press the Enter key.

F44

Omit Printing on Next Document

Allows you to omit printing by all document printers (Document Printer 1
(primary), Document Printer 1 (secondary), and Document Printer 12) on
the next document only.

FFF.003.002.001

Mode 10

Omit Printing on Next Document OFF

1=ON

• Enter the number one (1) to omit printing on the next document only.
• Press the Enter key.

FFF.003.002.001

Mode 10

Omit Printing on Next Document ON

0=OFF

• Enter the number zero (0) to print on the next document.
• Press the Enter key.

Summary of Contents for IMAGELINK 900



















































































































Search results

Summary of Contents for IMAGELINK 900

Reviews:

Related manuals for IMAGELINK 900

Brands by name

Popular brands

Kodak IMAGELINK 900, User Manual

Search results

Summary of Contents for IMAGELINK 900

Reviews:

Related manuals for IMAGELINK 900

Brands by name

Popular brands