A-41069 January 1993
6-4
Code
Operator Message Displayed
Description/Action Required
E200
Verify/enter Image Address
An error has occurred in the system and
E201
the Image Address may no longer be correct.
Use function code F08 to determine the last
Image Address.
Use the NEXT key to correct the Image Address,
if necessary.
E204
Skewed document - refeed
Press the Clear key.
Use the NEXT key to enter the correct Image
Address and refeed document(s).
E205
Level overflow - press next level
Press the Clear key.
Use the NEXT key to enter the correct Image
Address, or press a level key for a higher level.
E206
Check print head
Install the correct Document Printer print head.
E207
Check printer installation
Document Printer not correctly installed.
Properly install the Document Printer print head.
E211
Enter correct Image Address
Use the NEXT key to enter correct Image Address.
E214
Document length error - refeed
Press the Clear key.
Use the NEXT key to enter the correct Image
Address and refeed document(s).
E219
Clear error and refeed last doc
Press the Clear key. Press the Run key and refeed
the last document.
E220
Check for jam in entrance transp
Clear the document path.
Press the Clear key. Press the Jog key.
Press the Run key and refeed document(s).
E221
Clean entrance sensor
Perform maintenance/cleaning procedures.
E225
Check for jam in transport
Clear the document path.
Press the Clear key. Press the Jog key.
Press the Run key and refeed document(s).
E226
Clean slide-out sensor reflector
Perform maintenance/cleaning procedures.
E227
Check for jam in transport
Clear the document path.
Press the Clear key. Press the Jog key.
Press the Run key and refeed document(s).
E228
Check for jam in upper transport
Clear the document path.
Press the Clear key. Press the Jog key.
Press the Run key and refeed document(s).
E229
Clean exit sensor
Perform maintenance/cleaning procedures.
