manualshive.com logo in svg

Kodak DryView 8100, User Manual, Page: 57 / 75

Share
Download
Kodak DryView 8100 User Manual Download Page 57

DryView 8100 Laser Imager User Guide

5-8

8754020    2000 March Rev. B

Message

Number

Message Details/

Operator Action

Message

Displayed

P621

Printer Error

The imager has detected that a film parameter file is
missing.

Call for service.

P622

Printer Error

The imager is unable to print due to a system
problem.

Request a calibration print via the Local Panel.

P623

Printer Error

The imager is unable to print due to a system
problem.

Note P number and call for service.

P624

Calibrate Fail

The imager is unable to print because of  print
density problems.

Try a new film cartridge. If the problem remains, call
for service. (Manual mode is NOT usable with this
error.)

P631

Calibrate Fail

The Dmin specification was not met on a calibration
print.

Try a new film cartridge. If the problem remains, call
for service. Before service arrives, you can choose
to operate in manual mode. (See page 3-5.)

P632

Calibrate Fail

The Dmax specification was not met on a calibration
print.

Try a new film cartridge. If the problem remains, call for
service. Before service arrives, you can choose to
operate in manual mode. (See page 3-5.)

P640

Optics Fail

The imager is unable to print due to an optics
problem.

Cycle power.

P910

IMS Down

The Image Management System is not
communicating.

Cycle power.

P912

IMS XFR Parity

A parity error has been detected in the data
transferred from the Image Management System.

Cycle power.

Summary of Contents for DryView 8100












































































Reviews:

No comments