manualshive.com logo in svg

Kodak DryView 8100, User Manual, Page: 50 / 75

Share
Download
Kodak DryView 8100 User Manual Download Page 50

Troubleshooting

5-1 

2000 March Rev. B    8754020

Troubleshooting

Operator Troubleshooting

Operators occasionally have to clear film jams in the imager or correct other simple
problems. If more serious malfunctions occur, operators must call a trained Kodak
service technician (see page 5-18).

To help operators monitor imager operation and identify problems, the imager
displays status and error messages. The following paragraphs describe these error
messages and list corrective actions the operator should take.

Local Panel Message Types

The Local Panel displays two types of messages, as described below.

S04  Stopped      = 125
  P145 Media Type Err

Status Line

Message Line

Scroll Indicator for Lists

Sheets
remaining
in Cartridge

 Note

A scroll icon at the beginning of the message line indicates that more
information (above or below the line) is available. Press the Local Panel

  

 or 

key to display another line of information.

Status Information

Status messages (see Table 5-1) are strictly informational and require no operator
action.

Error Messages or Notices

Error messages (see Table 5-2) indicate an error condition within the imager. In
some cases, error messages can be cleared by operator action, but in many cases a
service call will be required. Notices are brief messages identifying special print
requests (for example, calibration prints).

Summary of Contents for DryView 8100












































































Reviews:

No comments