Kodak 8657 THERMAL PRINTER User Manual Download Page 81

Page: 81 / 94

C–1

January 1998

Appendix C

Windows Systems

A SCSI terminator is included with the printer. You must obtain the
proper cabling required for your configuration from your printer dealer
or distributor.

To connect the 8657 Printer directly to your computer (or to
daisy-chain the printer through an external SCSI device), perform
the following steps.

1. Turn off all equipment before connecting or disconnecting any

equipment from the SCSI bus.

2. Install the SCSI host adapter board in the computer.

3. Attach a SCSI cable appropriate to your equipment’s configuration.

If you are connecting the cable directly to the PC, use a 50-pin
submini “D” to a DB 50 cable.

If you are connecting the cable to an external disk drive, use the cable
type appropriate for the drive.

4. Attach a SCSI terminator.

NOTE: Some equipment is internally terminated. Refer to the equipment

documentation for details.

5. Turn on the printer and the computer.

Summary of Contents for 8657 THERMAL PRINTER






























































































Search results

Summary of Contents for 8657 THERMAL PRINTER

Reviews:

Related manuals for 8657 THERMAL PRINTER

Brands by name

Popular brands

Kodak 8657 THERMAL PRINTER, User Manual

Search results

Summary of Contents for 8657 THERMAL PRINTER

Reviews:

Related manuals for 8657 THERMAL PRINTER

Brands by name

Popular brands