Printer Options 2-13
ENCAD
®
T-200
TM
Reference Guide
To set margins
1
Choose
Setup Menu/Paper Options/Margins
.
2
Press
Select.
3
Use the up or down arrow button to display the desired margin type; Normal
or
Expanded
.
4
Press
Select
.
Auto-Cut
When the
Auto-Cut
option is set to on, the printer automatically cuts the media when
the image is complete. Be sure the image is dry before cutting, turn on the dryer and/or
specify a
Dry Time
. See “Setting a Dry Time” in this chapter for the procedure. You can
press the Shortcut button on the control panel and select
Cut
at any time to cut the
media.
Note:
Automatic cutting is disabled when the paper option is set to
Sheet
.
To set Auto-Cut
1
Choose
Setup Menu/Paper Option/Auto-Cut
.
2
Press
Select
.
3
Use the up or down arrow button to display
On
or
Off
.
4
Press
Select
.
Save Media
When the
Save Media
is On (the default), the media advances only as far as needed to
print the image. With the
Save Media
option turned off, the printer advances the full
print area of the loaded media. For example, if a 36 inch roll is loaded, the printer
advances the length of the print area for a standard 36 x 48" sheet even if the printed
image is only 30 inches long.
To turn off Save Media
1
Choose
Setup Menu/Paper Options/Save Media
.
2
Press
Select
.
3
Use the up or down arrow button to display
Off
.
4
Press
Select
.
