Printer Options 2-6
ENCAD
®
T-200
TM
Reference Guide
Image (file)
resolution
Printer dpi
setting
Effect on printed output
300 dpi
300 dpi
1 input pixel prints as 4
output pixels.
The printed image is the
same size as the
original.
300 dpi
600 dpi
1 input pixel prints as 1
output pixel.
The printed image is 1/4
the size of the original.
600 dpi
300 dpi
1 input pixel prints as 1
output pixel.
The printed image is four
times the size of the
original.
600 dpi
600 dpi
1 input pixel prints as 1
output pixel.
The printed image is the
same size as the
original.
Choosing paper options
Paper options let you define the following:
• Supply *
• Media Standard
• Margins
• Auto Wipe
• Auto-Cut
• Save Media
*Media feeding and loading are described in the Installation Sheet.
Media supply
This setting allows you to select your media supply options. The available options are
Sheet
and
Roll
. Select
Sheet
if you intend to use cut sheet stock. Select
Roll
if you are
going to use roll paper on the roll feeder. When you load media, the printer automati-
cally detects its width. It also detects and indicates media out conditions.
To choose supply type
1
Choose
Setup Menu/Paper Options/Supply=.
2
Press
Select.
3
Use the up or down arrow button to display the desired supply type.
4
Press
Select
.
