KODAK
1200i WIDE-FORMAT PRINTING SYSTEM
Technical Training Guide
50
Electrostatic discharges from media or personnel can cause data interference,
typically the data will be observed shifting away from the edge of print or image
may appear to have an ink overspray problem. Contact technical support for
suggestions to overcome these symptoms. A carriage axis error may result if
interference with image signals is too severe.
NOTE:
These symptoms are different from No. 2 above.
5.
If a CAE occurs and ink is observed around the service station area (ink is
spitting up through the service station and onto the carriage assembly) at right
side of printer the auto clean unit may be defective. Contact technical support.
NOTE:
The encoder strip, encoder sensor and carriage paper sensor should be
cleaned or errors may continue to occur. To clean the encoder strip/sensor refer
to Technical Bulletin 3. To clean the paper sensor remove power and the service
station, gently blot the paper sensor (located directly behind the magenta stall
position flex driver cable approximately 5-7 mm). Refer to Routine Maintenance.
