KODAK
1200i WIDE-FORMAT PRINTING SYSTEM
Technical Training Guide
22
Workstation/Server:
IP: 192.168.24.73
Subnet: 255.255.255.0
Gateway: 192.168.24.2
- Windows Driver
Loaded
RIP:
IP: 192.168.24.74
- uses Windows
driver printer port
Printer:
IP: 192.168.24.74
Subnet: 255.255.255.0
Gateway: 192.168.24.2
8).
Configuration Double-check
(example only
)
:
9).
To further verify connectivity either send a test file to printer via RIP or from the
EFPU
(Encad File Print Utility)
.
Launch EFPU (if previously loaded) or load
EFPU (from User System CD, select Software Utilities, located EFPU utility and
load). Select port previously configured (normally identified by a default IP
address the first time loaded). Select the printer test file (link and open an
xxxxxx.rtl file from System CD images subfolder) and select ‘PRINT’. Printer
should start printing within 30 seconds if sending pre-ripped files to printer. To
download printer firmware (product enhancements/bug fixes) perform same
procedure with a firmware file (.rom file; may be obtained from
www.encad.com
); printer will sound a beep after approximately 60 seconds
and reboot power automatically.
NOTE:
To function, the
EFPU utility may
require a LPT port be
available. Add a printer
port and assign to a
local LPT port if
necessary.
