Connection
/
Wiring
KEC-1
K01/1216
Page
24
of
43
7.3 Wire
connection
7.3.1 General:
Wiring to be done in strainless state only.
Length of cable skinning to be minimized
Not used cable entries must be closed with end caps
Use of cables with cross section of >= 0.25mm²
7.3.2 Power
supply
7.3.3 Modbus
(termination):
If the sensor placed at the end oft he Modbus system a termination is required.
Therfore the enclosed 120R resistor ist o be connected at Pin 1 and Pin 3 of connector „X2“
7.3.4 Pulse
Output
