MINOR CHANGE MACHINE FAMILIARIZATION
2
Dynamic Acera 03/05 Rev. 05
Page 3-71
10. Monitor Time Adjustment – FIGURE 2.13A
FIGURE 2.13A
Press mode
switch to increase the
number on the LCD
Press the
buzzer stop
switch to decrease the
number on the LCD
Year is displayed
Are all items
Y
ear,
M
onth,
D
ay,
H
our,
and
m
inutes
Calibrated?
MONITOR
SYSTEM
OK
If onitor locks in:
Monitor displays military time
Press three times
to unlock
10 : 10
14 : 57
Within 5 sec.
(Automatically)
MONITOR
SYSTEM
OK
Clock icon
YES
NO
Y 02
M 10
D 25
H 14
m 57
YQ102TimeAdjustment
Each time the light switch is
depressed, the screen will
cycle between Month, Day,
Hour, minutes, and Year.
NOTE: When depressing any monitor
switch, make sure to hold switch down
for 0.5 seconds to properly activate the
switch function.
Press and hold screen
change switch for
5~10 seconds and release
Note:
engine speed will display
while switch is depressed
Note:
if either switch is
depressed continuously,
numbers will change
rapidly
Note:
After time adjustment
is completed, the LCD may display
and the work light indicator may be "ON",
depress the work light switch to turn "OFF"
F
R
11. LCD Contrast Adjustment – FIGURE 2.13B
Press mode
switch to increase the
number on the LCD
Press the
buzzer stop
switch to decrease the
number on the LCD
10 : 10
Within 5 sec.
(Automatically)
MONITOR
SYSTEM
OK
Clock icon
YQ102LCDContrast
Press and hold
both switches
simultaneously
for 5 to 10 seconds and release
Adjust LCD contrast as needed
Press to record
LCD contrast
NOTE: When depressing any monitor
switch, make sure to hold switch down
for 0.5 seconds to properly activate the
switch function.
FIGURE 2.13B
12. Changing Warning Display Language –
FIGURE 2.13C
FIGURE 2.13C
Press switch and simultaneously
turn the ignition key to ON
J
Language icon
YQ102ChangeLanguage
Press mode
switch to cycle
between languages
Set the language required:
Press to record
required language
LANGUAGE CHOICES:
J:
Japan
E:
English (British)
EA:
English (American)
T:
Thailand
I:
Indonesian
F:
French
S:
Spanish
E:
European Symbols
G:
German
C:
Chineese
NOTE: When depressing any
monitor switch, make sure to
hold switch down for 0.5 sec.
to properly activate the
switch function.
NOTE:
Language selected in system can be checked by turning key
switch to “HEAT” position.