Dynamic Acera 03/05 Rev. 05
Page 3-24
3. Buzzer Stop Switch – FIGURE 3.18.a
When the engine coolant temperature
is too high, or various sensors of
mechatro controller (self-diagnosis)
fail, the alarm sounds intermittently. To
stop the sound, press the buzzer stop button.
NOTE
• Buzzer sounding due to engine cooling water
temperature rise can not be stopped.
• The buzzer sounding, because the preheat
complete and E/G oil pressure are displayed,
stops by turning the key switch OFF.
4. Throttle Potentiometer – FIGURE 3.18.A
The throttle potentiometer’s located on the
right hand operator console and controls
engine RPM. When the throttle potentiom-
eter is rotated to right or left position it in-
creases or decreases engine rpm and main-
tains engine at the programed RPM for that
particular position on the dial.
NOTE
In operation, when all pilot controls are in the
nuetral position for more than three seconds,
and the engine RPM is above 1050, the auto
excel reduces the engine speed to 1050.
Auto accel release condition
1. Place the safety lever in the up and lock po-
sition.
2. Located the one pin connector for the auto
acceleration function behind the operators
right hand console see FIGURE 3.18.b.
3. Change the position of the connector as in
indicated in FIGURE 3.18.b.
FIGURE 3.18.b
MACHINE FAMILIARIZATION
KPSS MODE SWITCH
KPSS Mode
ED190
Blade Runner
SK160LC
KPSS MODE
SWITCH
FIGURE 3.18.a
Autoaccelconnector
Normal position
Auto-acel. ON
Maintenance position.
Auto-acel disconnected
Manual Auto Accel Over ride Procedure: