1: Screen Change Switch
2: Buzzer Stop Switch
3: Work Mode Select Switch
4: Washer Switch
5: Wiper Switch
6: Travel Speed Select Switch
7: Auto Acceleration Switch
8: Menu Switch
9: Arrow Switch
21.2.6
ADJUSTING PROCEDURE OF DISPLAY
(1) For operator
1)
Auto Idle Stop
1.
After turning the starter key switch "ON", main screen (a) is appeared. And press "Menu Switch"
(8) to enter into "USER MENU" display (b).
2.
Using "UP" or "DOWN" arrow switch, move the cursor to "SWITCH STATUS". Press "RIGHT"
arrow switch to enter into "SWITCH STATUS" display (d).
3.
Using "UP" or "DOWN" arrow switch, move the cursor to "AUTO IDLE STOP" as display (e).
4.
Press "RIGHT" arrow switch to enter into display (f), and the background color of "OFF" turns to
be blue.
5.
Using "UP" or "DOWN" arrow switch, move the cursor from "OFF" to "ON".
6.
Press "Menu Switch" (8) to set the status. At this time, the background color of "ON" turns to be
black.
7.
Turn "OFF" the starter key switch once to store the status of "AUTO IDLE STOP".
［
21. MECHATRO CONTROLLER
］
21-58
Copyright © 2015 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S5YN0046E03] [0109CsCshWbYs]