1: Buzzer Stop Switch
2: Menu Switch
3: Up Arrow Switch
4: Down Arrow Switch
5: Next Arrow Switch
6: Back Arrow Switch
(11) Rearview camera
1)
Setting of display picture of rearview camera
1.
Hold down buzzer stop switch (1) and turn starter switch ON. The service diagnosis screen (a) is
displayed.
2.
Hold down buzzer stop switch (1) and press menu switch (2) 3 times. "SERVICE MENU" screen
(b) is displayed.
3.
Using "UP" switch (3) or "DOWN" switch (4), point the cursor to "SERVICE ADJUST 1" display
(b). Press "NEXT" switch (5), and SERVICE ADJUST 1-2 (c) is displayed.
4.
Using "UP" switch (3) or "DOWN" switch (4), point the cursor to "CAMERA 1 SETTING" display
(c).
5.
Press "NEXT" switch (5), and the cursor is pointed to "OFF" on display (d).
6.
Press "UP" switch (3), and it points "ON" of display (e).
7.
Press menu switch (2), and rearview camera is set.
8.
After that screen returns to "SERVICE ADJUST 1-2" (c).
9.
Turn off starter key switch.
［
21. MECHATRO CONTROLLER
］
21-40
Copyright © 2015 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S5YN0046E03] [0109CsCshWbYs]