Scene
Parameter name
Values
Scene type
External
/ Internal
Scene number
1
... 64
Allow saving scene
No /
Yes
Button text
[Text field]
Button icon
[Icon selection]
Scene push buttons allow activating or saving a scene. The scene can be external or internal
(
Scene type
parameter). The
Scene number
parameter allows specifying the target scene (1-
64).
For external scenes, the scene recall or store request will be sent through the global
Run/save
external scenes
object. For internal scenes, the request is not sent to the bus; instead, it is
processed internally (the internal scene controller will recall or store the selected scene).
Note
If an internal scene shall be run, make sure to enable and configure the “Internal scenes”
function (see
on page 44 and
on page 94).
Further, the
Allow saving scene
parameters controls whether the push button will allow only
activation of the associated scene, or whether it will also allow saving. If saving of scenes is
allowed, then a short press will trigger activation of the scene, while a long press will trigger
saving of the scene. If saving of scenes is not allowed, then pressing the button will always
activate the scene.
The
Button text
and
Button icon
parameters can be used to set a text label and/or icon to be
displayed on the component.
3.4
Control Pages
62
