3.2
Main
3.2.1
General
Parameter name
Values
Project name
[Text field]
Display orientation
Portrait
/ Landscape
Enable date/time objects
[Checkbox]
Date/time sending period
(If date/time objects are enabled)
0
... 255 (x 1 min, 0 = Disabled)
Thermostat 1
[Checkbox]
Thermostat 2
[Checkbox]
Inputs
[Checkbox]
Internal scenes
[Checkbox]
The
Project name
field can be used to enter a descriptive project name. This will be shown in
the System Settings > Info page.
The
Display orientation
parameter allows selecting the configuration of the user interface (por-
trait or landscape).
The
Enable date/time objects
parameter determines whether the
Date
(DPT 11.001) and
Time
(DPT 10.001) communication objects will be enabled. When enabled, writing to these objects
will update the internal date and time of the device. Conversely, when the date/time is modified
through the user interface (Preferences > Date & time), the objects will be updated with the new
setting.
If the
Date/time sending period
parameter is set to a non-zero value, date and time will also be
sent periodically to the bus.
The
Thermostat 1
,
Thermostat 2
,
Inputs
, and
Internal scenes
parameters enable the correspond-
ing configuration sections (see
on page 83,
on page 90, and
on page 94).
3.2
Main
44
