4.1.2
Custom languages
It is possible to install a custom language file in order to translate any system texts to a new lan-
guage. Please contact Iddero technical support ([email protected]) for further information
on this topic.
4.2
Firmware updates
If you need to update the firmware of the Iddero Verso touch panel, you can do so through the
device’s USB connection.
First, you will need to download the firmware release that you want to use. This will typically
be a file with
.bin
extension. This file should be copied unmodified to the root directory of a
FAT32-formatted USB flash drive. Specifically, do not change the filename, as otherwise it will
not be recognized as a valid firmware file.
Connect the USB flash drive to the Iddero Verso touch panel (use the Iddero USB extension
cable, part number E-KUSB1) and power on (or reboot) the device.
During the boot process, the USB flash drive will be automatically detected, and the firmware
update applied. The whole process takes only a few seconds; the device will beep three times
once the update is complete, and will boot with the new firmware automatically.
Note
Iddero Verso will not perform the firmware update if the version of the firmware file found
in the USB flash drive matches the version of the currently installed firmware.
You can check the current firmware version at any time in the Info page located in the System
Settings menu (see
on page 15).
4.2
Firmware updates
98
