Polystyrene
insert
Protective
film
ASSEMBLY
6
• Remove the polystyrene insert located between the main
table and the blade drum. Peel the protective film from
the main table.
• Attach the dust chute to the machine using two thumb
screws. The dust chute can be mounted to direct chips
to either side of thickness planer.
Note.
It is recommended that the thicknesser be used
with a dust extraction system for a cleaner and safer
working environment. Using a dust extraction system will
also help prevent clogging of the dust chute. An adapter
is provided for matching dust extraction system better.
Dust chute
Dust chute
• The thicknesser features
four holes in the base for
mounting to a workbench
or worktable.
The thicknesser should
be mounted level bench
or table before
operation.
Hole for mounting
41.4 cm
28.5 cm
Ø 10 cm
OPERATION
Observe the safety instructions and symbols on machine
before operation.
• Rotate the height adjustment handle for raising or
lowering the cutterhead.
The depth scale shows the height of cutterhead above
the main table.
Height
adjustment
handle
The depth
scale
• A spring loaded depth-of-cut gauge is attached to front
of rollercase. The pointer on depth-of-cut gauge
accurately displays the depth-of-cut per pass when
workpiece is positioned below the gauge. Cranking
the handle moves the rollercase down and the pointer
shows the desired depth-of-cut.
Depth-of-cut gauge