Table of contents ............................................................. 1
Technical specifications KN AP-130A .............................. 1
Instructions ...................................................................... 1
Safety introduction .......................................................... 1
Electrical requirements .................................................... 4
Accessories and attachments .......................................... 5
Carton contents .............................................................
5
Assembly .......................................................................
5
Operation .......................................................................
6
Maintenance ..................................................................
7
Parts list .........................................................................
8
Parts diagram ................................................................
9
TABLE OF CONTENTS
1
INTRODUCTION
To enjoy your new machine as long as possible, please read
carefully the Operating Instructions before using it. Further,
we recommend keeping the Operating Instructions to recall
the product features in the future.
Within the continuous product development, we reserve
the right to make technical changes to improve it. Any
reprints, even partial, are subject to approval.
This document represents translation of the original
Operating Instructions.
Use as designated
This machine has been designed for cutting wood and plastic
materials. You must not cut metal with the machine.
The express approval of manufacturer is
required before technical modifications of any kind are
carried out or the unit is used out of accordance with
the instruction.
Please contact your supplier in case of any guarantee
claims.
Any actions with regard to the guarantee may only be
dealt with by the authorised supplier
Any repairs after the expiry of the guarantee period may
be carried out by any qualified personnel
WARNING
The machine can not be used for works other than for which
the machine has been designed and that are specified in the
Operating Instructions.
Any other use is a use in conflict with the designation.
The manufacturer will not be liable for any consequential
damage and injuries.
Operator requirements
The operator must carefully read the Operating
Instructions before using the machine.
Qualification
No special qualification is necessary for using the machine
apart from detailed instruction by an expert.
Minimum age
The machine can only be operated by persons over 18 years
of age. An exception includes youngsters operating the ma-
chine within their professional education to achieve necessary
skills under trainer’s supervision.
Training
Using the machine only requires appropriate instructions by a
professional or reading the Operating Instructions. No spe-
cial training necessary.
SAFETY INSTRUCTIONS
When using electric tools, basic safety
precautions, including the following, should always be
followed to reduce the risk of fire, electric shock and
personal injury. Read all these instructions before
operating this product and save the instructions.
Read and follow all Safety Rules and
operating Instructions before First Use of this Product.
Keep this manual with tool.
WARNING
CAUTION
GENERAL
Please pass this safety information on to all persons who
work with the machine. People who operate this machine
must have read the instructions for use and, in particular, the
chapter concerning safety information. Once they have begun
work, it is too late. This is especially the case for personnel
who only occasionally use the machine, for example when the
machine is to be equipped or maintenance work carried out.
TECHNICAL SPECIFICATION KN AP-130A
Motor power:
Motor protection:
Pass-through width:
Pass-through height:
2 HP, 1500 W,
120V, 60 Hz
Yes
330 mm
152 mm
Max. width
acceptance:
Minimum
thickening
length:
Feed rate speed:
0.8 mm W>152 mm
2.8 mm W
≤
152 mm
152 mm
6 m / min
Cutting block speed:
Cutting blades:
Working table
Gross/net weight:
8500 RPM
2
330 x 235 mm
33/30.5 kg
• Pay attention to all safety and danger information on
the machine.
• Keep all safety and danger information on the machine
completely and in a legible condition.
• Check the line cables. Do not use defective electrical
connections.
• See that the machine is firmly situated on a firm ground.
• Make sure that there is adequate light in the work
place and near the machine.
• Take care when working, rotating cutting tools present
danger of bodily harm to fingers and hands.
• When the machine is in use, all protective equipment
and covers must be mounted.
• Keep all other people, especially children, away from
the work area and the machine when it is plugged in as
well as its cables.
