ProLine P16800
36
10 Accessories
ZU1472 Wall-mount adapter P16800, optional
The accessory ZU1472 enables the installation of the P16800 on a flat surface.
The accessories include a wall-mount adapter.
Use two M6 screws (EN 912/ISO 4762) with washers (EN 125/ISO 7089) to mount
the wall-mount adapter. (Screws and washers are not included in the scope of
delivery).
(not shown)
ZU1473 Diode and insertable jumper set
The ZU1473 accessory includes the following components:
• 2 x wired diodes for parallel connection of the internal shunt resistor on the
two-tier terminal. The signal current from the speed sensor continues to flow
even if an input plug-in terminal is disconnected from the product.
• 6 x bipolar insertable jumpers
To connect the power supply (V
S
- U
B
), and for the connection between ground
and shield.
