33
Options
Scope:
Sensor Verification
The Paraly SW 112 PC software allows a sensor to be assigned to the device.
See the Paraly SW 112 PC software user manual.
Setup / Cal / Logger Code
Access codes can be set on the meter or using the Paraly SW 112 PC software;
see page 35.
Configuration: SETUP CODE
Calibration: CAL CODE
Data logger: LOGGER CODE
Without entry of an access code, the data logger will only display logger data (
RCL
).
Temperature Calibration
(also separately available as Option 002 TEMP.CAL)
Option 002 TEMP.CAL (Temperature Calibration)
For Memosens sensors, you can perform a 1-point calibration of the internal
temperature detector. See page 21 for a description.
Option 001 SOP (Standard Operating Procedure)
Summary of Contents for Portavo 904
Page 2: ......
