35
Options
Press the
set
key to access the configuration mode.
Use the arrow keys to select the “SETUP CODE” function and set an
access code for configuration, “CAL CODE” to set an access code for
calibration, and/or “LOGGER CODE” to set an access code for the data
logger.
set
SETUP CODE
Press the
set
key.
set
First digit blinks.
Set value.
set
Next digit blinks.
Set value.
set
...
Set value, press
set
to save the configuration
access code.
When accessing the configuration menu, you will be prompted to enter an access
code.
If you want to set a code for access to calibration or the data logger, select “CAL
CODE” or “LOGGER CODE” and proceed as described above.
Note:
Functions are accessible to anyone with access code “0000”.
Important Note:
If you lose the SETUP access code, system access is locked.
See the next page for more information.
Access Codes for CONF, CAL, and Data Logger
(with Option 001 SOP only)
Options
Summary of Contents for Portavo 904
Page 2: ......
