KNF PJ25481-950.50.18, Original Installation Instructions

Page: 23 / 41

Diaphragm pump PJ25481-950.50.18 Operation
Translation of original Installation Instructions, english, KNF 125530-316634 06/18 15
7. Operation
7.1. Initial start-up
Operational requirements
Pump

All hoses attached properly.

Fan openings not blocked.

Specifications of the power supply corre-
spond with the data on the pump’s type plate.

Ensure that the pump outlet is not closed or
constricted.
Tab. 8
7.2. Start up
WARNING
Danger of burns from hot pump parts or hot medium
During or after operation of the pump, some pump
parts may be hot.

Allow the pump to cool after operation.

Take safety precautions against the contact of
hot parts/media.
WARNING
Injury of the eyes
During excessive approach to the inlet or outlet of
the pump, the eyes could be injured by the upcoming
vacuum or overpressure.

Don’t look into the pump’s inlet or outlet during
the operation.

Only operate the pumps under the operating parameters and
conditions described in Chapter 4. Technical Data.

Make sure the pumps are used properly (see Chapter 2.1).

Make sure the pumps are not used improperly (see Chapter
2.2).

Observe the safety precautions (see Chapter 3).