20
6.1 Mounting the HV 205-1 | HV 205-2 circular knife grinding
attachment
Use an hexagon screwdriver, width across flats
6 mm, to loosen the M 10 countersunk screw
(6-1/1) counterclockwise.
Pull off the swivel arm, mounted as standard, from
the side of the grinding machine.
From the right, insert the circular knife grinding
attachment (6-2/1) onto the grinding attachment
and secure it with the M 10 countersunk screw
(6-1/1).
6. Commissioning
All work must be performed by authorized trained personnel.
Observe the locally applicable safety and accident prevention regulations.
There is a risk that hands, hair, and clothing may be pulled in while the
grinding machine is switched on.
Serious injury may result. Wear personal protective equipment.
CAUTION
Figure 6-1
Removing the swivel arm
Figure 6-2
Mounting the HV 205-1 | HV 205-2
circular knife grinding attachment
1
1
