26
Figure 7-13
HV 205-2 circular knife grinding
attachment
Figure 7-14
Holding flange, 70 mm
Figure 7-15
Placing the centering disk onto the
locating bolt
7.2 Grinding circular knives, 250 - 470 mm, on the grinding wheel
Mount the HV 205-2 circular knife grinding
attachment according to the instructions (see
chapter 6).
Unscrew the SH 104 grinding lever (7-13/1).
7.2.1 Clamping circular knives
Place the 70 mm holding flange (7-14/1) with the
driver bore (7-14/2) downwards onto the locating
bolt (7-14/3).
Place the centering disk (7-15/1) corresponding to
the knife bore onto the locating bolt.
7. Operation
1
2
1
3
1
