27
Place on the circular knife (7-16/1).
Place the 70 mm clamping flange (7-16/2) onto
the circular knife.
Clamp the knife with the SH 104 grinding lever
(7-17/1).
7.2.2 Positioning circular knives on the grinding wheel
The cutting edge of the circular knife (7-18/1)
should be approx. 15 mm in front of the center
of the grinding wheel.
Figure 7-16
Placing on the circular knife
Figure 7-17
Clamping the circular knife
Figure 7-18
Positioning the circular knife on
the grinding wheel
7. Operation
1
2
1
1
