38
7. Operation
7.4 Adjusting the polishing / deburring ring
The polishing / deburring rings must be config-
ured in such a way that the front ring touches the
flange of the ring next to it.
The adjustment is carried out using the SW5 Allen
key provided with the accessories. Replace polish-
ing / deburring rings with a Ø of 165 mm.
The Allen screw has a right-hand thread.
Clockwise rotation = the rings move away from
one another.
Counterclockwise rotation = the rings move
towards one another.
ATTENTION
Use only original polishing and deburring
rings.
Using non-original polishing and deburring
rings can result in damage to the knife and
the machine.
Figure 7-19
Setting the polishing / deburring
rings
1
