29
No work on the machine is to be performed unless by trained personnel.
Observe the locally applicable safety and accident prevention regula-
tions.
CAUTION
7.1 Grinding hand knives
Place hand knives (7-1/1) in both knife magazines
outside the machine.
NOTICE
As shown in Figure 7-1, place the knives
beginning from the bottom left, as the
grinding program begins here.
ATTENTION
The hand knives must be cleaned before they
are placed in the knife magazine.
The cutting edge must face away from the
machine in the direction of the operator.
The knife grip must stand vertically, other-
wise it may collide with the knife gripper.
The cutting edge is not to be greater or less
than 70 - 270 mm.
Additionally, the cutting edge must be at
least 8 mm high, measured 20 mm from the
tip of the knife (see Figure 7-2).
7. Operation
Figure 7-1
Knife magazine
Figure 7-2
Knife size
1
20 mm
min. height
8 mm
