28
Interface Modul
1. Insert the rounded end of the lever latch into
the square opening of the selected connector
of the plug strip.
2. Press the latch down as indicated by arrow.
3. Insert the uninsulated end of the cable into the
opening under the latch.
4. Release the latch (1) and remove the lever
latch from the plug (2).
The cable is now firmly anchored in the plug strip.
Figure 14
Mounting Plug Strips
Example of the Cabling
The exemplary cabling plan demonstrates how the respective
connections can be switched. However, it is important that the analog
input of a channel is never simultaneously operated with the analog
and/or digital outputs of the same channel.
Smartline Pump 1000
Pump
Valve Drive
Detector Computer
RS232 (COM)
Smartline Manager 5000
Man. Injection Valve
Figure 15
Example of the Wiring
2
1
