74
Revision 5.5
6.10
Micromanipulator MICRO POINT 2R with MICRO SWITCH
6.10.1
Connection
Fig. 6-12:
Connection of micromanipulator MICRO POINT 2R to scanner casing Soft Scan Plus R
1 MICRO POINT 2R
4 MICRO SWITCH connector
2 Scanner casing Soft Scan Plus R
5 MICRO SWITCH
3 Control socket for MICRO SWITCH connector
•
Connect Soft Scan Plus R (2) to the mirror joint arm, see section 5.8.1 “Mounting a
Scanner (Normal Scan)”, page 40.
•
Insert signal cable of the MICRO SWITCH (4) into the control socket (3).
•
The MICRO POINT 2R (1) is ready for use.
The line scanning function can now be controlled from the display or directly via the
MICRO SWITCH (5) or MICRO POINT 2R (1), respectively, if the laser is set to
LASER READY
.
